OEC-R3H-ESK Настенный считыватель карт с клавиатурой Скачать Datasheet

Код товара:
Модель: OEC-R3H-ESK
  • Рабочая частота 13.56МГц
  • Размеры(Д x Ш x В): 128.8*88*20.9мм
  • Масса: 141г
  • Режим аутентификации: Карта, пароль

  • Поддержка вывода данных Wiegand/RS485.
  • Встроенный зуммер.
  • Поддерживает применение внутри и снаружи помещений.
  • Стабильность, чувствительность и отзывчивость.
  • Поддерживает протоколы ISO 14443 A и ISO 14443 B.

Model OEC-R3H-ESK
Hardware Specification
Operating Frequency 125kHz, 13.56MHz
Card reader interface RS-485 Serial Port x1, Wiegand Output x1
Dimensions 128.8 × 88 × 20.9mm
Weight 141g
Mount Method 115 × 73mm junction box, 86 × 86mm junction box
Operating Temperature -30°C to 65°C
Operating Humidity 10% to 90%
Storage Temperature -40°C to 65°C
Indicator Steady blue: Normal operation;
Steady green for 1s: Card authentication succeeded;
Steady red for 1s: Card authentication failed
Power Consumption 1.28W
Operating Voltage DC 12V ± 25%
Operating Current 107mA
Reading Distance IC card: max. 3cm
Authentication Mode Card
Protection Level IP54
DIP Switch 10-bit,
bit1-4: RS-485 Address (default 0000, 0=off, 1=on)
bit5: Mode Switch (Off=Wiegand, On=RS-485)
bit6: Wiegand Protocol (default off=Wiegand 34, on=Wiegand 26)
bit7: Termination Resistor (default off=disabled, on=enabled). Enable when RS-485 line is long or at high rate (>1Mbps)
bit8: Enable or disable card security function, default off (On: encryption authentication required, read CPU card file content. Off: no encryption verification, only read card physical number)
bit9-10: Reserved
Tamper Button Supported, continuous rapid beep alarm
Physical
Material PC
Basic Business
Reading Time < 1s
Card Type Supports Mifare card physical number, Mifare card sector number, EM card physical number, Desfire card physical number, Desfire card file number reading